Panasonic HDC-SD100 ユーザーガイド
26
VQT1T90
Setup
5
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
Select [YES] and perform steps 2 to 3 below to set the date and time.
- Rotate the mode dial to select
.
1
Select the menu. (
22)
2
Select the date or time to be set,
then set the desired value with
the cursor button.
then set the desired value with
the cursor button.
The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
The 24-hour system is used to display the time.
[
[
] appears on the right top of the screen
when [SET WORLD TIME] (
28) is set to
[HOME], while [
] appears when it is set to
[DESTINATION].
3
Press the cursor button to enter
the selection.
the selection.
The clock function starts at [00] seconds when
the cursor button is pressed.
Changing the date and time display mode
Select the menu. (
Select the menu. (
22)
[SETUP]
[DATE/TIME] desired display
style
You can also show or change the date and
You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
TIME button on the remote control.
Changing the date format
Select the menu. (
Select the menu. (
22)
[SETUP]
[DATE FORMAT] desired
display style
To set daylight saving time, select the daylight
saving time in [HOME] for [SET WORLD TIME]
after setting the clock.
after setting the clock.
The date and time function is driven by a built-
in lithium battery.
If the time display becomes [- -], the built-in
lithium battery needs to be charged. Use the
following steps to charge the battery.
following steps to charge the battery.
[SETUP]
[CLOCK SET] [YES]
[DATE]
[D/T]
[OFF]
Display style
Screen display
[Y/M/D]
2008. 11. 15
[M/D/Y]
11 15 2008
[D/M/Y]
15. 11. 2008
15. 11. 2008 12:34
15. 11. 2008