Panasonic th-37phd8 ユーザーガイド
40
1/2
Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Off
Off
Off
Enable
On
Off
Off
0
Off
Off
0
Options Adjustments
2/2
Options
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
0
Slot power
V. lnstallation
Rotate
V. lnstallation
Rotate
Remote ID
Serial ID
Serial ID
ID select
Button lock
Remocon User level
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the
button on main unit together with
button on the remote control and hold for more than 5 seconds. The
“SHIPPING” menu is displayed and the lock is released when it disappears.
Press or button to switch between modes.
Off
On
Off
Sets normal two screen display mode (see page 20).
On
Sets Advanced PIP mode (see page 21).
Sets normal two screen display mode (see page 20).
On
Sets Advanced PIP mode (see page 21).
Notes:
• When “INPUT lock” is “On”, you cannot use all the two screen
• When “INPUT lock” is “On”, you cannot use all the two screen
display functions.
•
,
buttons are unavailable during Advanced PIP mode
operation.
Press or button to switch between modes.
Off
On
Adjusts the image display size on screen.
Off
Sets the normal image display size on screen.
On
Sets the image display size approximately 95 % of the normal
image display.
Off
Sets the normal image display size on screen.
On
Sets the image display size approximately 95 % of the normal
image display.
Off
On
Notes:
• This setting is valid only when the input signals are as follows;
• This setting is valid only when the input signals are as follows;
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i,
1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component
Video, RGB, DVI, SDI, HDMI)
1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component
Video, RGB, DVI, SDI, HDMI)
• This setting is invalid when two screen display, digital zoom or
Multi screen is selected.
• When Display size is set to “On”, Pos. /Size adjustment cannot
be used.
• Refer to each board's operating instruction for DVI, SDI, HDMI's
corresponding signals.
Press or button to switch between
modes.
modes.
Off
On
Off
Does not rotate the image.
On
Rotates the image 180 degrees.
Does not rotate the image.
On
Rotates the image 180 degrees.
Note:
This mode is available except for TH-
37PWD8GK/S, TH-42PWD8GK/S, TH-
37PHD8GK/S, TH-42PHD8GK/S.
This mode is available except for TH-
37PWD8GK/S, TH-42PWD8GK/S, TH-
37PHD8GK/S, TH-42PHD8GK/S.
Press or button to switch between
modes.
modes.
Off
On
Sets the panel ID Control.
Off
Disables external control by the ID.
On
Enables the external control by the ID.
Off
Disables external control by the ID.
On
Enables the external control by the ID.
Press or button to switch between modes.
Off
On
Off
Disables ID remote control functions.
You can use normal remote control operations.
On
Enable ID remote control functions.
Disables ID remote control functions.
You can use normal remote control operations.
On
Enable ID remote control functions.
Sets panel ID number when panel is used
in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)