Billion 7402r2 ユーザーズマニュアル

 

Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which 
connecting to the router.   

You can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to insert 
to the Ethernet Client Filter table.  The maximum Ethernet client is 16.   

 

This section allows you to configure the settings for the router’s Ethernet ports to solve some of the 
compatibility problems that may be encountered while connecting to the Internet, as well allowing users 
to tweak the performance of their network. 

 

Five options to choose from: Auto, 10M half-duplex, 10M full-duplex, 100M 

half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems with legacy 
Ethernet devices, and you can configure different types to solve compatibility issues. The default is Auto, 
which users should keep unless there are specific problems with PCs not being able to access your LAN. 

TOS, Type of Services, is the 2

nd

 octet of an IP packet. 

Bits 6-7 of this octet are reserved and bit 0-5 are used to specify the priority  of the packet. 

This feature uses bits 0-5 to classify the packet’s priority. If the packet is high priority, it will flow first and 
will not be constrained by the Rate Limit.  Therefore, when this feature is enabled, the router’s Ethernet 
switch will check the 2

nd

 octet of each IP packet. If the value in the TOS field matches the checked 

values in the table (0 to 63), this packet will be treated as high priority.

35