Wacom bamboo fun ユーザーズマニュアル
38
38
•
Check the cordless mouse by opening the Pen Tablet control panel and selecting the M
OUSE
tab.
Click on the D
EFAULT
button to return the mouse to its default settings. Next:
A. Move the cordless mouse across the active area of the tablet; the screen cursor should move in
the corresponding direction on your monitor.
B. Test the buttons on your cordless mouse by clicking each button. The tablet status ring should
glow brightly each time a button is pressed.
When done, exit the diagnostics mode by pressing both the upper left and lower right ExpressKeys and
holding them down for three (3) seconds. In the Pen Tablet control panel, select the T
holding them down for three (3) seconds. In the Pen Tablet control panel, select the T
ABLET
tab and use
the pull-down menus to return the ExpressKeys to their previous settings.
4. Check the Touch Ring. Open the Pen Tablet control panel and select the Tablet tab. Click on the
D
EFAULT
button to return to the tablet default settings.
•
Open a Microsoft Office or image file.
•
Move your finger in a clockwise direction along the Touch Ring to zoom in on the image.
•
Move your finger in a counterclockwise direction along the Touch Ring to zoom out of the image.
5. Check the ExpressKeys. Open the Pen Tablet control panel and select the T
ABLET
tab. Click on the
D
EFAULT
button to return to the tablet default settings.
•
Open your Internet browser and click on a couple of links. Press the upper left ExpressKey to move
back within the browser. Press the upper right key to move forward within the browser.
back within the browser. Press the upper right key to move forward within the browser.
•
Press the lower left ExpressKey. For Windows Vista, Microsoft Journal should launch if the
application is available. Otherwise, all open windows should minimize to display a clean desktop.
application is available. Otherwise, all open windows should minimize to display a clean desktop.
•
Press the lower right ExpressKey. On Windows Vista systems running Aero, Flip 3D should be
activated with focus on the next open application. Otherwise, the Windows application switching
dialog should appear with focus on the next open application. On Macintosh systems, all open
windows should be tiled.
activated with focus on the next open application. Otherwise, the Windows application switching
dialog should appear with focus on the next open application. On Macintosh systems, all open
windows should be tiled.
6. If any of these tests fail you may have defective hardware. See technical support options.
7. After testing, use the Pen Tablet control panel to reconfigure your tablet and pen for any custom settings
you may originally have been using.