Intel Xeon X3460 BX80605X3460 ユーザーズマニュアル
製品コード
BX80605X3460
Processor Integrated I/O (IIO) Configuration Registers
80
Intel® Xeon® Processor 3400 Series Datasheet, Volume 2
3.3.5.4
MISCCTRLSTS—Miscellaneous Control and Status Register
(Sheet 1 of 3)
Register: MISCCTRLSTS
Device:
0 (DMI), 3-6 (PCIe)
Function: 0
Offset:
188h
Bit
Attr
Default
Description
63:50
RO
0
Reserved
49
RW1CS
0
Reserved
48
RW1C
0
Received PME_TO_ACK
Indicates that Integrated I/O received a PME turn off ACK packet or it
Indicates that Integrated I/O received a PME turn off ACK packet or it
timed out waiting for the packet.
47:38
RO
0
Reserved
37
RV
0
Reserved
36
RWS
0
Form-Factor
Indicates what form-factor a particular root port controls
0 = CEM/Cable
Indicates what form-factor a particular root port controls
0 = CEM/Cable
1 = SIOM
This bit is used to interpret bit 6 in the VPP serial stream for the port as
This bit is used to interpret bit 6 in the VPP serial stream for the port as
either MRL# (CEM/Cable) input or EMLSTS# (SIOM) input.
35
RW
0
Override System Error on PCI Express Fatal Error Enable
When set, fatal errors on PCI Express (that have been successfully
When set, fatal errors on PCI Express (that have been successfully
propagated to the primary interface of the port) are sent to the Integrated
I/O core error logic (for further escalation) regardless of the setting of the
equivalent bit in the ROOTCON register. When clear, the fatal errors are
only propagated to the Integrated I/O core error logic if the equivalent bit
in ROOTCTRL register is set.
34
RW
0
Override System Error on PCI Express Non-Fatal Error Enable
When set, non-fatal errors on PCI Express (that have been successfully
propagated to the primary interface of the port) are sent to the Integrated
I/O core error logic (for further escalation) regardless of the setting of the
equivalent bit in the ROOTCON register. When clear, the non-fatal errors
are only propagated to the Integrated I/O core error logic if the equivalent
bit in ROOTCON register is set.
33
RW
0
Override System Error on PCI Express Correctable Error Enable
When set, correctable errors on PCI Express (that have been successfully
propagated to the primary interface of the port) are sent to the Integrated
I/O core error logic (for further escalation) regardless of the setting of the
equivalent bit in the ROOTCON register. When clear, the correctable errors
are only propagated to the Integrated I/O core error logic if the equivalent
bit in ROOTCON register is set.
32
RW
0
ACPI PME Interrupt Enable
When set, Assert/Deassert_PMEGPE messages are enabled to be
When set, Assert/Deassert_PMEGPE messages are enabled to be
generated when ACPI mode is enabled for handling PME messages from
PCI Express. When this bit is cleared (from a 1), a Deassert_PMEGPE
message is scheduled on behalf of the root port if an Assert_PMEGPE
message was sent earlier from the root port.
31
RW
0
Disable L0s on Transmitter
When set, Integrated I/O never puts its tx in L0s state, even if OS enables
When set, Integrated I/O never puts its tx in L0s state, even if OS enables
it using the Link Control register.
30
RV
0
Reserved
29
RW
1
cfg_to_en
Disables/enables configuration timeouts, independently of other timeouts.
Disables/enables configuration timeouts, independently of other timeouts.
28
RO
0
Reserved