Wiebetech fcd ユーザーガイド

 

 

 

Revised October 23, 2006 

 

 

• Portable and rugged write-blocked solutions to image drives 

in the field – WiebeTech's proprietary write-blocking technology 
offers easy read-only access to suspect hard drives through high 
speed FireWire 800 (400 compatible) interfaces.  

• Retrieve data from 3.5" IDE drives through FireWire 800 (400 

compatible) – Forensic ComboDock is the best solution for 
accessing data from suspect 3.5" IDE drives. It quickly attaches 
drives via FireWire 800 (400 compatible). With two FireWire 
ports, it's daisy-chainable for more versatility.  

• Triple status indicators – show power connected, power on/off, 

and hard drive access  

• Rugged design, built to last – Grab it and go!  Forensic ComboDock is tough as nails and made to 

last. The small and rugged case contains a complete, high speed Oxford Semiconductor OXFW922 
bridge and is constructed from briefcase-tough aluminum for durability. World-compatible AC adapter 
accepts 100-240VAC so you can trot the globe.  

• Connect even more types of drives with Combo Adapters  

Use ComboDock in conjunction with our lineup of Combo Adapters and retrieve data on other drive 
types such as 1.8" Toshiba (found in iPods), 1.8" Hitachi drives, MicroDrives (found in iPod mini), 
PCMCIA drives, 2.5" notebook drives and SATA drives.  

• Bus-powered version available! Powered via FireWire - not a wall wart  

For more portability check out our bus-powered version of Forensic ComboDock. That's right ... bus-
powered, needing NO AC ADAPTER to power the drive. The outer FireWire port accepts bus power 
from hosts that provide adequate power, allowing single cable operation. Available for IDE drives (FCD-
BP) or with the SATA adapter included (FCD-BP-SATA).  

 

 

 
We recommend that you perform a final check on this product. 
 
Prior to first use, please verify that the write-blocking function of this product is working properly.  This is 
easily done: attach a known good formatted drive, and verify that the drive mounts properly on your 
computer.  Use a drive that has data on it that you are willing to overwrite.  Transfer files to the drive.  The 
files will appear to transfer to the drive.  Thereafter, unmount the drive and remount the drive.  The files 
that you wrote to the drive should not appear after the drive is remounted.  If they do appear, there is a 
problem with your Forensic Device, and you should contact our support department for further 
instructions.  
 
WiebeTech support may be reached at: 

(866) 744-8722 (toll free) 
(316) 744-8722 (international)  
(316) 744-1398 (fax) 

support@wiebetech.com

 (email)