Western Digital wdbacg0020hch ユーザーガイド

ページ / 126
TROUBLESHOOTING
113
MY BOOK LIVE
USER MANUAL
8.   Go back to the opening window of (My) Computer to view the Public folder of 
your device under Network Drives.
Setup or WD SmartWare is unable to detect a My Book Live.
If Setup or WD SmartWare is unable to detect a My Book Live, then certain network 
protocols may be blocked on the network or the computer. In those cases, the My 
Book Live is available through a direct IP or network name connection. For example, 
you can open the Dashboard using http://129.25.676.30/ or http://mybooklive/. 
„
If the computer is on a wireless network, connect using an a Ethernet cable 
and try again.
„
Temporarily disable any computer firewalls, security software, or other 
networking and retry.
„
Check your local router for any firewalls or security software. If present, 
please check your router documentation on temporarily disabling the 
software or configuring the software to allow UPnP or UDP traffic.
I am unable to play music, videos and/or view pictures through my digital 
media adapter.
„
Because there are many kinds of file formats for pictures, videos and music, 
your particular digital media adapter may not support a format to play or 
display it. Depending on the digital media adapter device (for example, Xbox 
360 or PlayStation 3) that you have, you may need to update your device to 
support the media format that you want to play. Refer to your digital media 
adapter’s user manual for further information.
„
Make sure the share containing your media content is enabled to serve that 
type of media. See “Creating a New Share” on page 83.
How do I safely shut down the My Book Live? 
If you are unable to shut down the drive using the Dashboard or the WD Quick View 
icon, check the LED on the front of the drive to make sure it is not blinking. Blinking 
indicates that the unit is processing information (for example, backing up or 
transferring files). 
If the LED is blinking green, data is being read from or written to the drive. Follow 
these steps:
1.   If possible, wait for the LED to stop blinking. 
2.   Double-check every computer on the network to ensure no files are open or 
transfers are in progress.
3.   Disconnect the Ethernet cable.
4.   Wait 60 seconds.
5.   Unplug the power cable.