Pentax K10D ユーザーズマニュアル
161
4
Func
tion
Refere
nce
This allows you to deliberately overexpose (brighten) or under-expose
(darken) your picture.
Select 1/2 EV or 1/3 EV in [EV Steps] in the [A Custom Setting] menu. (p.162)
You can adjust the EV Compensation from –3 to +3 (EV) in increments of
1/2 EV or –2 to +2 (EV) in increments of 1/3 EV.
(darken) your picture.
Select 1/2 EV or 1/3 EV in [EV Steps] in the [A Custom Setting] menu. (p.162)
You can adjust the EV Compensation from –3 to +3 (EV) in increments of
1/2 EV or –2 to +2 (EV) in increments of 1/3 EV.
1
Set the compensation with the
front e-dial while the m button
is pressed.
front e-dial while the m button
is pressed.
2
Confirm the compensation
value in the viewfinder.
value in the viewfinder.
m
is displayed during compensation.
N
appears when the flash
compensation is set.
Setting the Exposure
EV compensation is not available when the exposure mode is set to
B
B
(Green), a (Hyper-manual), p (Bulb) or M (Flash X-sync speed) mode.
• The EV compensation cannot be canceled by turning the camera off or by
setting any other exposure mode.
• The EV compensation value is reset to 0 when the Green button is pressed
while holding down the m button.
Compensation value