Freestyle fs84945 ユーザーズマニュアル

®

To reduce carbon foot print, these 

Freestyle instructions are printed with 

soy inks on recycled paper.

1- Hour Hand

2- Minute Hand

3- Second Hand

S1 – Start/stop Button

S2 – Lap/reset Button

S3 – Mode Button

S4 – Light Button

This Freestyle product features unique 

Hydro Pushers®: these pushers can be 

pressed under water to a dynamic water 

pressure (not water depth) of 3 ATM.

1. Pull crown out to first click position 

B.

2. Turn crown to set time.

3. Push crown back to position A.

The watch has four display modes: 

HOME TIME (TIME) / FOREIGN TIME 

(TM-2), HOME TIME ALARM (ALM1) / 

FOREIGN TIME ALARM (ALM2), STOP-

WATCH (STW) and TIMER (TMR).

To change from one display mode to 

another, press S3 button once. The 

mode description will appear for 

approximately 2 seconds before the 

selected mode is activated.

The S1, S2 and S3 buttons each has a 

prompting arrow. Their corresponding 

arrow will appear whenever the button 

is required to be pressed while setting 

the times, calendar and alarms.

To display FOREIGN TIME, press S2 

button when HOME TIME is displayed. 

The mode description (TM-2) will 

appear shortly before FOREIGN TIME 

is displayed. To change back to HOME 

TIME, press S2 button.

To display the daily FOREIGN TIME 

ALARM, press S2 button when HOME 

TIME ALARM is displayed. The mode 

description (ALM2) will appear shortly 

before FOREIGN TIME ALARM is dis-

played. To change back to HOME TIME 

ALARM, press S2 button.

1.   Press S3 button to select HOME 

TIME or FOREIGN TIME mode to 

set.

2.   Press and hold S2 button for 

approximately 2 seconds, the mes-

sage “SET” will be displayed and 

the second digits will blink.

3.   Press S1 button to reset second 

digits to zero.

4.   Press S3 button, the minute digits 

will blink.

5.   Press S1 button to set the minute 

digits. Holding down the button will 

speed up the process.

6.   Press S3 button, the hour digits will 

blink.

7.   Press S1 button to set the hour 

digits. Holding down the button will 

speed up the process.

8.   Follow the same pattern to set the 

date, month, day (of the week), hour 

format and calendar format.

9.   To set the hour format, press S1 

button to toggle between 12-hour 

and 24-hour formats. The P.M. 

indicator will be displayed to 

indicate the time period 12:00 P.M. 

– 11:59P.M. in 12-hour format.

10. To set the calendar format, press 

S1 button to toggle between M-D 

(month-date) and D-M (date-month) 

formats.

11. When finished making all the set-

tings, press S2 button to confirm.

NOTE: The chosen hour format and 

calendar format will apply to both 

HOME TIME mode and FOREIGN TIME 

mode.

NOTE: In FOREIGN TIME settings, only 

minutes, hours, date, month and day 

(of the week) are open to setting.

1.  Press S3 button to select HOME 

TIME ALARM or FOREIGN TIME 

ALARM to set.

2.  Press and hold S2 button for ap-

proximately 2 seconds, the message 

“SET” will be displayed and the 

minute digits will blink.

3.  Press S1 button to set the minute 

digits. Holding down the button will 

speed up the process.

4.  Press S3 button, the hour digits will 

blink.

5.  Press S1 button to set the hour 

digits. Holding down the button will 

speed up the process.

6.  When finished making all the set-

tings, press S2 button to confirm the 

settings.

1.  Press S3 button to select HOME 

TIME ALAM or FOREIGN TIME 

ALARM to set. 

2.  Press S1 button once to activate 

the daily alarm. Alarm indicator 

 will appear.

3.  Press again to activate the hourly 

chime. Chime indicator   will ap-

pear.

4.  Press the third time to activate both 

functions. Both indicators will ap-

pear.

5. Press the fourth time to deactivate 

both functions. Both indicators will 

disappear.

A tune will be emitted by the hour when 

the hourly chime function is activated.

An 20-second alarm tune will be emit-

ted at the designated time when the 

alarm is activated. To stop the tune, 

press any button.

1.  Press S3 button to select STOP-

WATCH mode.

2.  The stopwatch will then be displayed 

in its current state – stopped, run-

ning, or reset.

3.  To resume a counting, press S1 but-

ton to resume from where it left off.

4.  To start a new counting, reset the 

stopwatch to zero first. 

  Press S1 button to stop counting, 

then press S2 button to reset coun-

ter to zero.

For the measurement of elapsed time,

In STOPWATCH mode,

1.  Press S1 button to start counting.

2.  To stop counting, press S1 button.  

Press S1 button again to resume 

from where it left off.

3.  To reset to zero, press S1 button 

to stop counting and then press S2 

button.

For the measurement of split time, 

In STOPWATCH mode,

1.  Press S1 button to start counting. 

2.  While the stopwatch is running, 

press S2 button to register a lap. 

The stopwatch is still running in the 

background. 

  To display the current elapsed time, 

press S2 button again.

3. Repeat the last step until all the laps 

have been registered.

4. To reset to zero, press S1 button to 

stop counting and then press S2 

button.

NOTE: The stopwatch will count up to 

59 minutes and 59.99 seconds before 

starting from zero again.

NOTE: You can leave the stopwatch 

running while switching over to other 

operating modes.

1.  Press S3 button to select TIMER 

mode.

2.  Press S2 button to alter the timer 

setting among 1, 3, 5, 10, 15, 20, 25, 

30, 45 and 60 minutes.

1. Press S3 button to select TIMER 

mode.

2. The timer will then be displayed in 

its current state – stopped, running, 

or reset.

3. To resume a stopped counting, press 

S1 button to resume from where 

it left off.

4. To start a new counting, reload the 

timer first.

  Press S1 button to stop counting, 

then press S3 button to reload the 

timer.

5. When reaching zero in a countdown, 

a tune will be emitted. To stop the 

tune, press any button. The timer 

will reload automatically.

NOTE: You can leave the timer running 

while switching over to other operating 

modes.

Press S4 button to turn on the back-

light for approximately 3 seconds.

FS1151-Pr

ecision 2.0-A

G7861-R00

S1

A B

S2

S3

S4

1

3

2