Outlaw 950 ユーザーズマニュアル

Outlaw Audio

Model 950 7.1 Channel Preamp/Processor

To enter 6 Channel Direct mode:
1.  Press the 6 CH button on the remote control.

The Model 950 is set to Bypass mode, circumventing any internal sur-
round processing. The Front Panel Display and OSD display will read:

DIRECT 

BYPASS

6 CH INPUT 

00dB

2.  Press the 6 CH button again to turn off 6 Channel Direct mode, or 

use the Source selection buttons on the remote or front panel to 

select another source. 

If you use the remote 6 CH button, the unit will return to the previously 
chosen source and settings.

This control sets the Front Panel Display brightness. The default display bright-
ness is set to be easily visible in a normally lit room. If you prefer to dim the 
display, for example, during movie viewing in a darkened room, you can access 
the VFD Brightness setting from the System Configuration menu.

To set the Front Panel Display brightness:
1.  Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The 
cursor on the OSD should be pointing to the Input Configuration menu 
and 

INPUT CONFIG

 appears on the Front Panel Display.

2.  Press the   button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration 
menu and 

SYSTEM CONFIG

 appears on the Front Panel Display.

3.  Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display 
and the OSD (see figure 4 on page 28).  The selected menu item should 
be 

FRONT DISTANCE

.

4.  Press the   button until the VFD Brightness menu is selected. 
5.  Use the < and > buttons to choose between Full and Half.
6.  After making your selection, press the   button twice to exit the 

Main Menu.

This menu is used to set how long the ON SCREEN DISPLAY will remain visible 
after a button is pushed or setting is changed.

To set the OSD Time Out:
1.  Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The 
cursor on the OSD should be pointing to the Input Configuration menu 
and 

INPUT CONFIG

 appears on the Front Panel Display.

2.  Press the  button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration 
menu and 

SYSTEM CONFIG

 appears on the Front Panel Display.

3.  Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display 
and the OSD (see figure 4 on page 28).  The selected menu item should 
be 

FRONT DISTANCE

.

4.  Press the  button until the OSD Time Out menu is selected. 
5.  Use the < and > buttons to cycle through the available options.

The following times appear as you scroll through them:

30Sec25Sec20Sec15Sec10sec5Sec


3Sec0sSec

6.  After making your selection, press the  button twice to exit the Main Menu.

This option allows you set how long the unit will remain on before automati-
cally shutting off. This mode can be accessed using the SLEEP button on the 
remote control, or from System Configuration menu.

To set the Sleep Timer from the Main Menu:
1.  Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The 
cursor on the OSD should be pointing to the Input Configuration menu 
and 

INPUT CONFIG

 appears on the Front Panel Display.

2.  Press the   button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration 
menu and 

SYSTEM CONFIG

 appears on the Front Panel Display.

3.  Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display 
and the OSD (see figure 4 on page 28).  The selected menu item should 
be 

FRONT DISTANCE

.

4.  Press the   button until the Sleep Time Set menu is selected. 
5.  Use the < and > buttons to cycle through the available choices.

The following times appear as you scroll through them: 
6

0Min50Min40Min30Min20Min10Min5Min

6.  After making your selection, Press the   button twice to exit the 

Main Menu.

To set the Sleep Timer using the SLEEP button:
1.  Press the SLEEP button on the remote control.

The Front Panel Display and the OSD will show the following:

DVD 

DOLBY D

SLEEP TIME SET: 0Min

2.  Press  the  SLEEP  button  repeatedly  to  cycle  through  the  time 

remaining options.

The following times appear as you press the SLEEP button: 
6

0Min50Min40Min30Min20Min10Min5Min

The Sleep Timer menu will disappear automatically approximately 5 
seconds after you make your selection.