Freestyle fs84844 ユーザーガイド

To reduce carbon foot print, these 

Freestyle instructions are printed with 

soy inks on recycled paper.

S1 – Start/stop button

S2 – Lap/reset button

S3 – Mode button

The watch has four display modes: 

NORMAL TIME, CALENDAR, ALARM 

and STOPWATCH.

In NORMAL TIME mode, press and 

hold S1 button to display the 

CALENDAR, or press and hold S2 

button to display the ALARM.

Press S3 button to toggle between 

NORMAL TIME mode and STOPWATCH 

mode.

1.  Press S3 button to select NORMAL 

TIME mode. 

2.  Press and hold S3 button for around 

3 seconds, then release and press 

S3 button again. The Tuesday 

  indicator and the second digits will 

blink.

3.  Press S2 button to reset the second 

digits to zero. This will increase the 

time by 1 minute if the original 

  setting is at 30 to 59 seconds.

4.  Press S1 button, the minute digits 

will blink.

5.  Press S2 button to set the minute 

digits. Holding down the button will 

speed up the process.

6.  Press S1 button, the hour digits will 

blink 

7.  Press S2 button to set the hour 

digits. Holding down the button will 

speed up the process.

8.  Follow the same pattern to set the 

month, date and day (of the week).

9.  When finished making all the 

  settings, press S3 button to confirm.

In NORMAL TIME mode, press and 

hold S2 button, then press S3 button 

to toggle between 12-hour and 24-

hour format. The “A” indicator will be 

displayed to indicate the watch is in 

12-hour format. 

After setting to 12-hour format, the 

P.M. indicator will be displayed to 

indicate the time period 12:00P.M.-11-

:59P.M. in NORMAL TIME mode.

In NORMAL TIME mode, press and 

hold S1 button, then press S2 button to 

toggle between month-date and 

date-month format.

In NORMAL TIME mode, 

1. Press and hold S3 button for around 

3 seconds. The Monday indicator and 

the hour digits will blink.

2. Press S2 button to set the hour 

digits. Holding down the button will 

speed up the process.

3. Press S1 button, the minute digits 

will blink.

4. Press S2 button to set the minute 

digits. Holding down the button will 

speed up the process.

5. When finished making all the 

  settings, press S3 button to confirm.

NOTE: The alarm will automatically be 

activated after being set.

In NORMAL TIME mode,

1. Press and hold S2 button and then 

press S1 button once to activate the 

hourly chime. The chime indicator    

 will appear.

2. Press again to active the alarm. The 

alarm indicator 

 will appear.

3. Press the third time to deactivate the 

hourly chime. The chime indicator 

will disappear.

4. Press the fourth time to deactivate 

the alarm. The alarm indicator will 

disappear.

A tune will be emitted by the hour when 

the hourly chime function is activated.

An alarm tune will be emitted at the 

designated time when the alarm is 

activated. To stop the tune, press any 

button.

1. Press S3 button to select 

  STOPWATCH mode.

2. The stopwatch will then be displayed 

in its current state – reset, running, 

or stopped.

3. To resume a counting, press S1 

  button to resume from where it left 

off.

4. To start a new counting, reset the 

stopwatch to zero first.

 

Press S1 button to stop counting,  

 

then press S2 button to reset 

 

counter to zero.

For the measurement of elapsed time:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. To stop counting, press S1 button 

once. Press S1 button again to 

resume from where it left off.

3. To reset to zero, press S1 button to 

stop counting and then press S2 

button.

For the measurement of split time:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. While the stopwatch is running, 

press S2 button once to register a 

lap. The split time of the registered 

lap will be displayed. 

  The stopwatch is still running in the 

background. To display the currently 

accumulated time, press S2 button 

again.

3. Repeat the last step until all the laps 

have been registered.

4. To reset to zero, press S1 button to 

stop counting and then press S2 

button.

For the measurement of two finishes:

In STOPWATCH mode,

1. Press S1 button to start counting.

2. While the stopwatch is running, 

press S2 button to register and 

display the time of the first runner. 

The stopwatch is still running in the 

background.

3. Press S1 button to stop and register 

the time of the second runner.

4. Press S2 button to display the time 

of the second runner.

5. To reset to zero, press S2 button 

again.

NOTE: You can leave the stopwatch 

running while switching over to other 

operating modes.

FS1080-SUMMER-A

G6746-R01

S1

S2

S3