3com 4200G PWR 参照ガイド
3Com Switch 4200G Family
23
Command Reference
local-user password-display mode
Use the
local-user password-display-mode
command to set the password display mode of all users.
System view
lock
Use the
lock
command to lock the current user interface and prevent unauthorized users from accessing it.
User view
logging-host
Use the
logging-host
command to configure a public logging host on the management device for member
devices.
Cluster view
loopback-detection control enable
Use the
loopback-detection control enable
command to enable loopback detection and control function
for Trunk ports and Hybrid ports.
Ethernet Port view
loopback-detection enable
Use the
loopback-detection enable
command to enable the loopback detection function globally or for
a specific port.
System view
Ethernet Port view
loopback-detection interval-time
Use the
loopback-detection interval-time
command to set the time interval for detecting the external
loopback for a port.
System view
loopback-detection per-vlan enable
Use the
loopback-detection per-vlan enable
command to configure the system to run loopback
detection on all VLANs for the Trunk and Hybrid ports.
Ethernet Port view
ls
Use the
ls
command to display the files in the specified directory.
SFTP Client view
ls
Use the
ls
command to display the information about a specified remote file.
FTP Client view
mac-address
Use the
mac-address
command to add/modify the MAC address table entry.
System view
Port view
mac-address max-mac-count
Use the
mac-address max-mac-count
command to configure the maximum number of MAC addresses an
Ethernet port can learn.
Ethernet Port view
mac-address max-mac-count 0
Use the
mac-address max-mac-count0
command to disable a switch from learning MAC address in a
VLAN.
VLAN view
mac-address multicast interface vlan
Use the
mac-address multicast
command to add a multicast MAC address entry.
System view
mac-address multicast vlan
Use the
mac-address multicast vlan
command to add a multicast MAC address entry.
Ethernet Port view
mac-address security
Use the
mac-address security
command to add Security MAC address manually.
Ethernet Port view
System view
mac-address timer
Use the
mac-address timer
command to set the aging time for dynamic MAC address entries.
System view