3com 4200G PWR 参照ガイド

3Com Switch 4200G Family

 

27

Command Reference

packet-filter

Use the 

 command to apply ACL rules on the port to filter packets.

parity

Use the 

 command to set the check mode of the user interface.

passive

Use the 

command to set the data transmission mode to be passive mode.

password

Use the 

command to configure or change the system login password for a user.

password

Use the 

 command to set a password for the local users.

peer-public-key end

Use the 

 command to return to system view from public key view.

ping

Use the 

 command to check the IP network connection and the reachability of the host.

port

Using the 

 command, you can add one port or one group of ports to a VLAN.

port access vlan

Use the 

command to assign the access port to a specified VLAN.

port hybrid protocol-vlan vlan

Use the

 command to deliver specified protocol-based VLANs to a port.

port hybrid pvid vlan

Use the 

 command to configure the default VLAN ID of the hybrid port.

port hybrid vlan

Use the 

 command to add the port to the specified VLAN(s). The port needs to have been 

made a hybrid port before you can do this. See the related command below.

port isolate

Use the 

 command to add an Ethernet port to the isolation group.

port link-aggregation group

Use the 

 agg_id command to add an Ethernet port to a manual or static 

aggregation group.

port link-type

Use the 

 command to configure the link type of the Ethernet port.

port-security enable

Use the 

 command to enable port security.

port-security intrusion-mode

Use the 

 command to set the action mode of the Intrusion Protection 

feature.

port-security max-mac-count

Use the 

 command to set the maximum number of MAC addresses allowed 

to access the port.