3com 8807 参照ガイド
Martini MPLS L2VPN Configuration Commands
765
out-label: Value of the out-label, ranging from 16 to 1,023.
Description
Use the static-lsp transit command to create a static L2VPN LSP for the midway
transmitting LSR.
transmitting LSR.
Use the undo static-lsp transit command to remove the static L2VPN LSP created
for the midway transmitting LSR.
for the midway transmitting LSR.
You need to create two LSPs (for transmitting and receiving) before creating a
remote CCC connection. You also need to enable the two LSPs to traverse
through each of the midway LSRs.
remote CCC connection. You also need to enable the two LSPs to traverse
through each of the midway LSRs.
Related command: static-lsp egress l2vpn, static-lsp ingress l2vpn.
Example
# Create a static L2VPN LSP for the interface of VLAN 201 on the midway
transmitting LSR, with the in-label of 123 and the out-label of 253.
transmitting LSR, with the in-label of 123 and the out-label of 253.
[3Com-mpls] static-lsp transit bj-sh l2vpn incoming-interface vlan-
interface 201 in-label 123 nexthop 202.34.114.7 out-label 253
Martini MPLS L2VPN
Configuration
Commands
Configuration
Commands
display mpls l2vc
Syntax
display mpls l2vc [ interface vlan-interface vlan-id | verbose ]
View
Any view
Parameter
vlan-id: ID of the VLAN whose interface is used to create the virtual circuit.
verbose: Displays the detailed information.
Description
Use the display mpls l2vc command to display the VC information of Martini
VLL.
VLL.
Example
# Display detailed VC information.
<SW8800> display mpls l2vc verbose
Interface: Vlan-interface1000State: down, Encapsulation: ethernet,
Service: VLL
VC-ID: 4294967295, VC State: down, Destination: 3.3.3.3
Group ID: Local 0, Remote 0, VC Label: Local 32770, Remote 0,
Tunnel Type: LSP, Tunnel Index: 25