3com 8807 参照ガイド
244
C
HAPTER
17: Q
O
S C
OMMANDS
Description
Use the display qos-vlan traffic-limit command to display the parameter
configuration for traffic limit in VLAN, including the configuration information
about related ACL and policing actions.
configuration for traffic limit in VLAN, including the configuration information
about related ACL and policing actions.
Related command: traffic-limit and traffic-params.
Example
# Display the parameter configuration of traffic limit in VLAN.
<SW8800> display qos-vlan traffic-limit
Vlan 1 traffic-limit
Inbound:
There is no configuration.
Outbound:
There is no configuration
Vlan 2 traffic-limit
Inbound:
Matches: Acl 2000 rule 3 running (Action-type: Eacl, Destination slot: 3)
Committed Information Rate: 8192 Kbps
Committed Burst Size: 10000 byte(s)
Excess Burst Size: 20000 byte(s)
Peak Information Rate: 0 Kbps
Exceed action: drop
Outbound:
There is no configuration.
display qos-vlan
traffic-priority
Syntax
display qos-vlan [ vlan-id ] traffic-priority
View
Any view
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan traffic-priority command to display the priority
marking configuration in VLAN, including the ACL associated with the traffic
priority marking, the type and value of the priority marking.
marking configuration in VLAN, including the ACL associated with the traffic
priority marking, the type and value of the priority marking.
Related command: traffic-priority.
Example
# Display the priority marking configuration in VLAN.
<SW8800> display qos-vlan traffic-priority
Vlan 1 traffic-priority
Inbound:
There is no configuration.
Outbound:
There is no configuration
Vlan 2 traffic-priority
Inbound:
Matches: Acl 2000 rule 1 running (Action-type: Eacl, Destination slot: 3)
Priority action: remark-policed-service, untrusted, dscp: 13, cos: 6,
local-precedence: 6, drop-priority: 1
Outbound:
There is no configuration.