3com 8807 参照ガイド
VLAN-ACL Configuration Commands
287
DSCP priorities and EXP values of MPLS packets. To choose this mode, specify the
remark-policed-service dscp dscp-value when executing this command.
remark-policed-service dscp dscp-value when executing this command.
4 Specify a set of service parameters. To choose this mode, specify
remark-policed-service untrusted dscp dscp-value cos cos-value
local-precedence local-precedence drop-priority drop-level parameter when
executing this command.
local-precedence local-precedence drop-priority drop-level parameter when
executing this command.
n
■
The "DSCP + Conform-Level -> Service-parameter" mapping table and "EXP +
Conform-Level -> Service-parameter" mapping table here are mapping tables
with the Conform-Level of 0.
Conform-Level -> Service-parameter" mapping table here are mapping tables
with the Conform-Level of 0.
■
Before selecting the second or third mode listed above, make sure the "DSCP +
Conform-Level -> Service-parameter" mapping table and "EXP +
Conform-Level -> Service-parameter" mapping table already exist. For more
information about these mapping tables, refer to the qos conform-level,
dscp, and exp commands.
Conform-Level -> Service-parameter" mapping table and "EXP +
Conform-Level -> Service-parameter" mapping table already exist. For more
information about these mapping tables, refer to the qos conform-level,
dscp, and exp commands.
Example
# Choose automatically-allocated service parameters for the packets matching the
rules that permit packets in the ACL 3000 in the data flow that the ports in VLAN
receives.
rules that permit packets in the ACL 3000 in the data flow that the ports in VLAN
receives.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] vlan 2
[3Com-vlan2] traffic-priority inbound ip-group 3000 auto
traffic-redirect
Syntax
traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { cpu | next-hop ip-addr1 [ip-addr2] [ invalid { forward |
drop } ] }
system-index index ] ] { cpu | next-hop ip-addr1 [ip-addr2] [ invalid { forward |
drop } ] }
undo traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule ]
View
VLAN view
Parameter
inbound: Redirects data packets received by a port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number: Sequence number of ACL, ranging from 2000 to
3999. acl-name: Name of the ACL, which must be a character string starting with
an English letter (a-z or A-Z), and without any space in it.
advanced ACLs. acl-number: Sequence number of ACL, ranging from 2000 to
3999. acl-name: Name of the ACL, which must be a character string starting with
an English letter (a-z or A-Z), and without any space in it.
rule rule: Specifies the subitem of an active ACL, ranging from 0 to 127; if not
specified, all subitems of ACL will be activated.
specified, all subitems of ACL will be activated.
system-index index: Specifies the system index value of the rule which will be
indexed during operation. After delivering a rule, the system automatically assigns
a globally unique index value to the rule. When using this command to deliver a
rule, you can also specify a system index value for the rule, but the value may
indexed during operation. After delivering a rule, the system automatically assigns
a globally unique index value to the rule. When using this command to deliver a
rule, you can also specify a system index value for the rule, but the value may