3com 8807 参照ガイド
OSPF Configuration Commands
429
Priority: 1
Designated Router: 10.110.10.1
Backup Designated Router: 10.110.10.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
display ospf lsdb
Syntax
display ospf [ process-id ] [ area-id ] lsdb [ brief | [ asbr | ase | network | nssa |
router | summary [ verbose ] ] [ ip-address ] [ originate-router ip-address |
self-originate ] [ verbose ] ]
router | summary [ verbose ] ] [ ip-address ] [ originate-router ip-address |
self-originate ] [ verbose ] ]
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
processes if you do not specify a process ID.
area-id: ID of the OSPF area, which can be a decimal integer in the range 0 to
4,294,967,295 or in IP address format.
4,294,967,295 or in IP address format.
brief: Views brief database information.
asbr: Views the database information of Type-4 LSA (summary-Asbr-LSA).
ase: Views the database information of Type-5 LSA (AS-external-LSA).
network: Views the database information of Type-2 LSA (Network-LSA).
nssa: Views the database information of Type-7 LSA (NSSA-external-LSA).
router: Views the database information of Type-1 LSA (Router-LSA).
summary: Views the database information of Type-3 LSA (Summary-Net-LSA).
ip-address: Link state ID in IP address format.
Table 59 Description of the fields of the display ospf interface command
Field
Description
Cost
Cost of the interface
State
State of the interface state machine
Type
Network type of OSPF on the interface
Priority
Priority of the interface for DR election in its network
Designated Router
DR on the network in which the interface resides
Backup Designated
Router
Router
BDR on the network in which the interface resides
Timers
OSPF timers, defining as follows:
Hello
Interval of Hello packet
Dead
Interval of dead neighbors
Poll
Interval of poll
Retransmit
Interval of retransmitting LSA
Transmit Delay
Delay time of transmitting LSA