3com 8807 参照ガイド
VRRP Configuration Commands
791
Parameter
None
Description
Use the display vrrp ifm command to display the configuration information of
the VRRP-enabled IFM device.
the VRRP-enabled IFM device.
Example
# Display the configuration information of the VRRP-enabled IFM device.
<SW8800> display vrrp ifm
Interface : Vlan-interface1000
VRID : 1
Track IFM increased value : 20
IFM Connecting Status :
CPU ID State
========== ================
1 Master
2 Backup
display vrrp statistics
Syntax
display vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
Any view
Parameter
vlan-interface interface-number: Specifies the name of the VLAN interface to
which the virtual router belongs.
which the virtual router belongs.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the display vrrp statistics command to view the information about the VRRP
statistics.
statistics.
If the interface name and virtual router ID are not specified, the statistics
information about all the virtual routers on the switch will be displayed. If only the
interface name is specified, the statistics information about all the virtual routers
on the interface will be displayed. If the interface name and virtual router ID are
specified, the statistics information about the specified virtual router on the
interface will be displayed.
information about all the virtual routers on the switch will be displayed. If only the
interface name is specified, the statistics information about all the virtual routers
on the interface will be displayed. If the interface name and virtual router ID are
specified, the statistics information about the specified virtual router on the
interface will be displayed.
Example
# Display the VRRP statistics information on VLAN-interface 2.
<SW8800> display vrrp statistics vlan-interface 2
Interface : Vlan-interface2
VRID : 1
CheckSum Errors : 0 Version Errors : 0
VRID Errors : 0 Advertisement Interval Errors : 0
IP TTL Errors : 0 Auth Failures : 0
Invalid Auth Type : 0 Auth Type Mismatch : 0
Packet Length Errors : 0 Address List Errors : 0