3com 8807 参照ガイド
DHCP Server Configuration Commands
825
View
System view
Parameter
None
Description
Use the dhcp server detect command to enable fake DHCP server detection.
Use the undo dhcp server detect command to disable fake DHCP server
detection.
detection.
Fake DHCP server detection is disabled by default.
Example
# Enable fake DHCP server detection.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] dhcp server detect
DHCP Server
Configuration
Commands
Configuration
Commands
debugging dhcp server
Syntax
debugging dhcp server { all | error | event | packet }
undo debugging dhcp server { all | error | event | packet }
View
User view
Parameter
all: Used to enable/disable all types of debugging for DHCP server.
error: Used to enable/disable error debugging for DHCP server errors, including
those occur when a DHCP server processes DHCP packets or assigns IP addresses.
those occur when a DHCP server processes DHCP packets or assigns IP addresses.
event: Used to enable/disable debugging for DHCP server events, including the
assigning of IP addresses and timing out of ping packets.
assigning of IP addresses and timing out of ping packets.
packet: Specifies debugging for packets received/sent by DHCP servers, including
DHCP packets and ping packets.
DHCP packets and ping packets.
Description
Use the debugging dhcp server command to enable debugging for DHCP
server.
server.
Use the undo debugging dhcp server command to disable debugging for DHCP
server.
server.