3com 8807 参照ガイド
Isolate-user-vlan Configuration Commands
97
Description
Use the isolate-user-vlan command to establish the mapping relationship
between isolate-user-vlan and Secondary VLAN.
between isolate-user-vlan and Secondary VLAN.
Use the undo isolate-user-vlan command to cancel the mapping relationship.
By default, there is no mapping relationship between isolate-user-vlan and
Secondary VLAN.
Secondary VLAN.
Before you execute the isolate-user-vlan command, the VLAN can include hybrid
ports, access ports, or no ports. After this command is executed, the mapping
relationship between isolate-user-vlan and Secondary VLAN is established.
ports, access ports, or no ports. After this command is executed, the mapping
relationship between isolate-user-vlan and Secondary VLAN is established.
The actual operation include: for access ports or hybrid ports whose PVIDs are the
same as isolate-user-VLAN IDs and join to isolate-user-vlans in the untagged mode,
add the ports of isolate-user-VLAN to every Secondary VLAN and add the ports of
all Secondary VLANs to isolate-user-VLAN.
same as isolate-user-VLAN IDs and join to isolate-user-vlans in the untagged mode,
add the ports of isolate-user-VLAN to every Secondary VLAN and add the ports of
all Secondary VLANs to isolate-user-VLAN.
After undo isolate-user-vlan command is executed, the mapping relationship
between isolate-user-vlan and Secondary VLAN will be canceled. The actual
operation include: delete the ports included in isolate-user-vlan from Secondary
VLAN and delete the ports included in Secondary VLAN from isolate-user-vlan.
between isolate-user-vlan and Secondary VLAN will be canceled. The actual
operation include: delete the ports included in isolate-user-vlan from Secondary
VLAN and delete the ports included in Secondary VLAN from isolate-user-vlan.
Related command: display isolate-user-vlan.
Example
# Map isolate-user-VLAN 10 to Secondary VLAN 2, 3, 4, 5, and 9.
[SW8800] isolate-user-vlan 10 secondary 2 to 5 9
isolate-user-vlan enable
Syntax
isolate-user-vlan enable
undo isolate-user-vlan enable
View
VLAN view
Parameter
None
Description
Use the isolate-user-vlan enable command to set a VLAN as an
isolate-user-VLAN.
isolate-user-VLAN.
Use the undo isolate-user-vlan enable command to cancel the configuration.
An isolate-user-VLAN is allowed to contain multiple ports, including upstream
ports connecting to other switches. However, the VLAN can only contain access or
hybrid ports, not trunk ports.
ports connecting to other switches. However, the VLAN can only contain access or
hybrid ports, not trunk ports.
Related command: display isolate-user-vlan.