3com 8807 ユーザーガイド
69
D
EVICE
MANAGEMENT
Device Management
Overview
Overview
With the device management function, the switch can display the current running
state and event debugging information about the slots, thereby implementing the
maintenance and management of the state and communication of the physical
devices. In addition, there is a command available for rebooting the system, when
some function failure occurs.
state and event debugging information about the slots, thereby implementing the
maintenance and management of the state and communication of the physical
devices. In addition, there is a command available for rebooting the system, when
some function failure occurs.
Device Management
Configuration
Configuration
The main device management tasks are to check the status of the modules, CPU,
and the memory usage of the switch.
and the memory usage of the switch.
The following sections describe the configuration tasks for device management:
■
■
■
■
■
■
Rebooting the Switch
It would be necessary for users to reboot the switch when failure occurs.
Perform the following configuration in user view.
Enabling the Timing
Reboot Function
After you enable the timing reboot function on the switch, the switch will be
rebooted on the specified time.
rebooted on the specified time.
Perform the following configuration in user view, and display schedule reboot
command can be performed in any view.
command can be performed in any view.
Table 744 Reboot the switch
Operation
Command
Root the switch
reboot [ slot slot-no ]
Table 745 Enable the Timing Reboot Function
Operation
Command
Enable the timing reboot function of the
switch, and set specified time and date
switch, and set specified time and date
schedule reboot at hh:mm [ yyyy/mm/dd ]
Enable the timing reboot function of the
switch, and set waiting time
switch, and set waiting time
schedule reboot delay { hhh:mm | mmm }