3com 2816 ユーザーガイド

C

HAPTER

 4: C

ONFIGURING

 

THE

 S

WITCH

Figure 9   Summary Page

Information that you can view on the Summary page 
include:

■

System Information – Contains optional fields that 
you can fill out to identify the Switch. It also shows 
the object ID and the time elapsed since the Switch 
was last started. After you update any of the 
editable fields in this section, click Apply to save your 
changes.

■

IP Information – Shows the IP address settings of the 
Switch. To modify any of these settings, click IP 
Settings. This takes you to the IP Settings page, 
shown in Figure 11

 

on

 

■

Switch Information – Shows the serial number, total 
number of ports, and the version of the hardware 
(board) on the Switch

■

Management Software Information – Shows the 
versions of the loader (firmware), boot ROM, and 
code.

If you request for technical assistance from 3Com 
Support, you may be asked to print out the information 
on this page.

To prevent unauthorized users from accessing the Web 
interface and modifying the Switch’s settings, the 
interface is password-protected. 

The default admin account settings are:

■

User name – 

■

Password – blank (no password)

To ensure that unauthorized users do not access the 
Web interface, 3Com recommends that you set an 
admin password when you first configure the Switch.