3com 2816 ユーザーガイド
8
C
HAPTER
1: I
NTRODUCING
THE
B
ASELINE
S
WITCH
any combination. This offers you the flexibility of using
SFP transceivers to provide connectivity between the
Switch and a 1000 Mbps core network.
SFP transceivers to provide connectivity between the
Switch and a 1000 Mbps core network.
When an SFP port is in operation, the corresponding
10/100/1000BASE-T port is disabled.
10/100/1000BASE-T port is disabled.
Physical Features
Figure 1 shows the front and rear panels of the Switch.
The numbers in this diagram refer to numbered sections
in “Front Panel” below and “Rear Panel” on page 11.
The numbers in this diagram refer to numbered sections
in “Front Panel” below and “Rear Panel” on page 11.
Figure 1 Front and Rear Panels (2816-SFP)
Front Panel
The front panel of the Switch contains a series of
indicator lights (LEDs) that help describe the state of
various networking and connection operations.
indicator lights (LEDs) that help describe the state of
various networking and connection operations.
(1) RJ-45 10/100/1000 Ports
WARNING: RJ-45 Ports. These are shielded RJ-45 data
sockets. They cannot be used as standard traditional
WARNING: RJ-45 Ports. These are shielded RJ-45 data
sockets. They cannot be used as standard traditional
telephone sockets, or to connect the unit to a
traditional PBX or public telephone network. Only
connect RJ-45 data connectors, network telephony
systems, or network telephones to these sockets.
Either shielded or unshielded data cables with shielded
or unshielded jacks can be connected to these data
sockets.
traditional PBX or public telephone network. Only
connect RJ-45 data connectors, network telephony
systems, or network telephones to these sockets.
Either shielded or unshielded data cables with shielded
or unshielded jacks can be connected to these data
sockets.
AVERTISSEMENT: Points d’accès RJ-45. Ceux-ci sont
protégés par des prises de données. Ils ne peuvent pas
être utilisés comme prises de téléphone conventionnelles
standard, ni pour la connection de l’unité à un réseau
téléphonique central privé ou public. Raccorder
seulement connecteurs de données RJ-45, systèmes de
réseaux de téléphonie ou téléphones de réseaux à ces
prises.
Il est possible de raccorder des câbles protégés ou non
protégés avec des jacks protégés ou non protégés à ces
prises de données.
protégés par des prises de données. Ils ne peuvent pas
être utilisés comme prises de téléphone conventionnelles
standard, ni pour la connection de l’unité à un réseau
téléphonique central privé ou public. Raccorder
seulement connecteurs de données RJ-45, systèmes de
réseaux de téléphonie ou téléphones de réseaux à ces
prises.
Il est possible de raccorder des câbles protégés ou non
protégés avec des jacks protégés ou non protégés à ces
prises de données.
WARNHINWEIS: RJ-45-Porte. Diese Porte sind
geschützte Datensteckdosen. Sie dürfen weder wie
normale traditionelle Telefonsteckdosen noch für die
Verbindung der Einheit mit einem traditionellem
privatem oder öffentlichem Telefonnetzwerk gebraucht
werden. Nur RJ-45-Datenanscluße, Telefonnetzsysteme
or Netztelefone an diese Steckdosen anschließen.
Entweder geschützte oder ungeschützte Buchsen dürfen
an diese Datensteckdosen angeschlossen werden.
geschützte Datensteckdosen. Sie dürfen weder wie
normale traditionelle Telefonsteckdosen noch für die
Verbindung der Einheit mit einem traditionellem
privatem oder öffentlichem Telefonnetzwerk gebraucht
werden. Nur RJ-45-Datenanscluße, Telefonnetzsysteme
or Netztelefone an diese Steckdosen anschließen.
Entweder geschützte oder ungeschützte Buchsen dürfen
an diese Datensteckdosen angeschlossen werden.
The Switch has 16 (2816-SFP) or 24 (2824-SFP)
10/100/1000 Mbps auto-negotiating ports. Each port
10/100/1000 Mbps auto-negotiating ports. Each port
8
5
6
3
1
13
4
16
5
8
9
3C16485A
Baseline Switch 2816-SFP Plus
12
Link/Activity : Green = 1000M, Yellow = 10/1000M,
Flash = Activity, Duplex : On = Full, Off = Half
Module Present
2
1
7
4
9