3com S7906E インストール手順
1-16
Support for the packet statistics function of the display interface command depends on the device
model. For description of the display interface command, refer to the Ethernet Port Command in the
Access Volume.
Resetting BGP L2VPN Connections
To do…
Use the command…
Remarks
Reset BGP L2VPN
connections
connections
reset bgp l2vpn { as-number |
ip-address | all | external |
internal }
ip-address | all | external |
internal }
Available in user view
MPLS L2VPN Configuration Examples
Example for Configuring a Remote CCC Connection
Network requirements
z
The CEs are connected to the PEs through VLAN interfaces.
z
A remote CCC connection is created between CE 1 and CE 2.
The main steps for configuring a CCC remote connection are:
z
Create remote CCC connections on the PEs. No static LSP is required on the PEs.
z
Configure two static LSPs on the P device for packets to be transferred in both directions.
Figure 1-3 Network diagram for configuring a remote CCC connection
CE 1
CE 2
Remote CCC connection
PE 1
PE 2
P
Vlan-int30
Vlan-int30
Vlan-int20
Vlan-int20
Vlan-int10
Vlan-int10
Vlan-int10
Vlan-int10
Loop0
Loop0
Loop0
Device Interface IP
address
Device Interface IP
address
CE 1
Vlan-int10
100.1.1.1/24 P
Loop0 10.0.0.2/32
PE 1
Loop0
10.0.0.1/32
Vlan-int20
10.2.2.2/24
Vlan-int30 10.1.1.1/24
Vlan-int30 10.1.1.2/24
CE 2
Vlan-int10
100.1.1.2/24 PE
2 Loop0 10.0.0.3/32
Vlan-int10
10.2.2.1/24
Configuration procedure
1) Configure CE 1