3com S7906E インストール手順
13
To do…
Use the command…
Remarks
Configure traffic policing for
uplink/downlink traffic
uplink/downlink traffic
uni uni-number
port-policy { { inbound
{ cir cir-value |
bucket-depth
bucket-depth-value |
extra-burst-size
ebs-value }* } | outbound
cir cir-value [ pir
pir-value ] }
port-policy { { inbound
{ cir cir-value |
bucket-depth
bucket-depth-value |
extra-burst-size
ebs-value }* } | outbound
cir cir-value [ pir
pir-value ] }
Optional
The CIR should be a multiple of 64.
By default, traffic policing is not
configured for a UNI.
configured for a UNI.
Note that: only H3C ONUs support the
outbound keyword.
outbound keyword.
Example for UNI Priority Remarking Configuration
Network requirements
z
Set the uplink bandwidth of the ONU to 50 Mbps.
z
Configure the VLAN operation mode as transparent for both UNI 1 and UNI 2.
z
Configure priority remarking for UNI 1: Remark tagged packets sourced from the MAC address of
000A-EB7F-AAAB with CoS 3 precedence.
z
Configure priority remarking for UNI 2: Remark tagged packets sourced from the MAC address of
001B-EB7F-21AC with CoS 1 precedence.
Network diagram
Figure 12-3 Network diagram for UNI priority remarking configuration
Configuration procedure
# Create ONU 3/0/1:1, and bind it to the ONU.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] using onu 1
[Sysname-Olt3/0/1] quit
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] bind onuid 000f-e200-0104
# Set the uplink bandwidth of the ONU port to 50 Mbps (64 Kbps × 800).
[Sysname-Onu3/0/1:1] upstream-sla minimum-bandwidth 800 maximum-bandwidth 800