3com S7906E インストール手順

 

 

1-9 

 

Follow the step below to upgrade the boot file (distributed IRF device): 

Specify a boot file for the next 
boot of an SRPU device on a 
member device 

boot-loader file file-url 
chassis chassis-number slot 
slot-number { main | backup } 

Required 

Available in user view. 

 

z 

You must save the file for the next device boot under the root directory of the device. You can copy 

or move a file to change the path of it to the root directory. 

z 

To execute the boot-loader command successfully, you must first save the file for the next device 

boot under the root directory of the storage media on the active SRPU (distributed device) 

z 

The names of the files for the next boot of the active SRPU and the standby SRPU may be different, 

but the versions of the files must be the same; otherwise, the device may not boot normally. 

(distributed device) 

 

You can set temperature alarm thresholds for a card by using the following commands. When the 

temperature of a card reaches the threshold, the device will generate alarms. 

Follow these steps to configure temperature alarm thresholds for a card: (distributed device) 

Enter system view 

— 

Configure temperature alarm 
thresholds for a card 

temperature-limit slot-number 
lower-value upper-value 

Optional 

By default, the temperature 
alarm thresholds for a card are 
as follows: 

z 

Upper limit: 80°C (176°F) 

z 

Lower limit: 0°C (32°F) 

 

Follow these steps to configure temperature alarm thresholds for a card: (distributed IRFing device) 

Enter system view 

— 

Configure temperature alarm 
thresholds for a card 

temperature-limit chassis 
chassis-number slot 
slot-number lower-value 
upper-value 

Optional 

By default, the temperature 
alarm thresholds for a card are 
as follows: 

z 

Upper limit: 80°C (176°F) 

z 

Lower limit: 0°C (32°F)