3com S7906E インストール手順

 

1-5 

z 

If you need to configure that the managed devices send traps to the NMS when it triggers an alarm 

event, you should configure the SNMP agent as described in SNMP Configuration in the System 

Volume before configuring the RMON alarm function. 

z 

If the alarm variable is the MIB variable defined in the history group or the Ethernet statistics group, 

you must make sure that the RMON Ethernet statistics function or the RMON history statistics 

function is configured on the monitored Ethernet interface; otherwise, the creation of the alarm 

entry fails, and no alarm event is triggered. 

Follow these steps to configure the RMON alarm function: 

Enter system view 

— 

Create an event entry in the event 
table 

rmon event entry-number [ description 
string ] { log | log-trap log-trapcommunity | 
none | trap trap-community } [ owner text ] 

Required 

Create an entry in the alarm table 

rmon alarm entry-number alarm-variable 
sampling-interval { absolute | delta } 
rising-threshold threshold-value1 
event-entry1 falling-threshold 
threshold-value2 event-entry2 [ owner 
text ] 

Create an entry in the private 
alarm table  

rmon prialarm entry-number 
prialarm-formula prialarm-des 
sampling-interval { absolute | changeratio 
| delta } rising-threshold threshold-value1 
event-entry1 falling-threshold 
threshold-value2 event-entry2 entrytype 
{ forever | cycle cycle-period } [ owner 
text ] 

Required 

Use at least one 
command. 

 

z 

A new entry cannot be created if its parameters are identical with the corresponding parameters of 

an existing entry Refer to 

 for the parameters to be compared for different entries. 

z 

The system limits the total number of each type of entries (Refer to 

 for the detailed 

numbers). When the total number of an entry reaches the maximum number of entries that can be 

created, the creation fails.