3com S7906E インストール手順
1-14
To do…
Use the command…
Remarks
Enter interface view
interface interface-type
interface-number
interface-number
—
Configure the current port as a
mirroring port
mirroring port
[ mirroring-group group-id ]
mirroring-port { both |
inbound | outbound }
mirroring-port { both |
inbound | outbound }
Required
By default, a port does not
serve as a mirroring port for any
mirroring group.
serve as a mirroring port for any
mirroring group.
A mirroring group can contain multiple mirroring ports.
Configuring the Monitor Port for a Local Mirroring Group
On the source device, configure the tunnel interface as the monitor port; on the destination device,
configure the port that connects the data monitoring device as the monitor port.
You can configure the monitor port for a mirroring group in system view, or assign the current port to a
mirroring group as the monitor port in interface view. The two modes lead to the same result.
Configuring the monitor port in system view
Follow these steps to configure the monitor port for a local mirroring group in system view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the monitor port
mirroring-group group-id
monitor-port monitor-port-id
monitor-port monitor-port-id
Required
By default, no monitor port is
configured for a mirroring
group.
configured for a mirroring
group.
Configuring the monitor port in interface view
Follow these steps to configure the monitor port for a local mirroring group in interface view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
interface-number
—
Configure the current port as
the monitor port
the monitor port
[ mirroring-group group-id ]
monitor-port
monitor-port
Required
By default, a port does not
serve as the monitor port for
any mirroring group.
serve as the monitor port for
any mirroring group.