3com S7906E インストール手順
1-4
z
Usually ARP dynamically resolves IP addresses to MAC addresses, without manual intervention.
z
To allow communication with a device using a fixed IP-to-MAC mapping, configure a
non-permanent static ARP entry for it. To allow communication with a device through a specific
interface and using a fixed IP-to-MAC mapping, configure a permanent static ARP entry for it.
Configuring ARP
Configuring a Static ARP Entry
A static ARP entry is effective when the device works normally. However, when a VLAN or VLAN
interface to which a static ARP entry corresponds is deleted, the entry, if permanent, will be deleted,
and if non-permanent and resolved, will become unresolved.
Follow these steps to configure a static ARP entry:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure a permanent
static ARP entry
static ARP entry
arp static ip-address
mac-address vlan-id
interface-type interface-number
[ vpn-instance
vpn-instance-name ]
mac-address vlan-id
interface-type interface-number
[ vpn-instance
vpn-instance-name ]
Required
No permanent static ARP entry is
configured by default.
configured by default.
Configure a
non-permanent static
ARP entry
non-permanent static
ARP entry
arp static ip-address
mac-address [ vpn-instance
vpn-instance-name ]
mac-address [ vpn-instance
vpn-instance-name ]
Required
No non-permanent static ARP entry is
configured by default.
configured by default.
z
The vlan-id argument must be the ID of an existing VLAN which corresponds to the ARP entries. In
addition, the Ethernet interface following the argument must belong to that VLAN. A VLAN
interface must be created for the VLAN.
z
The IP address of the VLAN interface corresponding to the vlan-id argument must belong to the
same network segment as the IP address specified by the ip-address argument.
Configuring the Maximum Number of ARP Entries for an Interface
Follow these steps to set the maximum number of dynamic ARP entries that an interface can learn:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet interface view
interface interface-type
interface-number
interface-number
—