3com S7906E 参照ガイド

 

1-9 

preference: Routing protocol preference, in the range of 1 to 255.  

Use the apply preference command to set a preference for a routing protocol.  

Use the undo apply preference command to remove the clause configuration.  

No preference is set for a routing protocol by default. 

If you have set preferences for routing protocols with the preference command, using the apply 

preference command will set a new preference for the matching routing protocol. Non-matching routing 

protocols still use the preferences set by the preference command.  

# Configure node 10 in permit mode of route policy policy1: Set the preference for OSPF external 

routes to 90. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match route-type external-type1or2 

[Sysname-route-policy] apply preference 90 

apply preferred-value preferred-value 

undo apply preferred-value 

Route policy view 

2: System level 

preferred-value: Preferred value, in the range of 0 to 65535.  

Use the apply preferred-value command to set a preferred value for BGP routes.  

Use the undo apply preferred-value command to remove the clause configuration.  

No preferred value is set for BGP routes by default. 

# Configure node 10 in permit mode of route policy policy1: Set a preferred value of 66 for BGP routing 

information matching AS-PATH list 1.  

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match as-path 1