3com S7906E 参照ガイド

 

2-38 

This command takes effect on H3C ONUs only.  

 

Specify the speed for UNI 1 to 10 Mbps.  

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] uni 1 speed 10 

uni uni-number vlan-mode tag pvid pvid [ priority priority-value ] 

undo uni uni-number vlan-mode 

ONU port view 

2: System level 

uni-number: UNI number, in the range 1 to the number of current ONU UNIs. The maximum number of 

UNI ports supported is 80.  

Value: 802.1p precedence value of a packet, in the range of 0 to 7.  

pvid: Default VLAN ID,  in the range 1 to 4094.  

Use the uni vlan-mode tag pvid command to configure the VLAN operation mode of the specified UNI 

as the VLAN tag mode and set the related parameters.  

Use the undo uni vlan-mode command to restore the default VLAN operation mode of the UNI.  

By default, the VLAN operation mode of a UNI is VLAN transparent transmission mode.  

Related command: uni vlan-mode translation pvid, uni vlan-mode transparent.