3com S7906E 参照ガイド

 

1-3 

z 

Use the group-id argument to specify the port mirroring group to be removed. 

z 

Use the all keyword to remove all the port mirroring groups. 

z 

Use the local keyword to remove all the local port mirroring groups. 

z 

Use the remote-destination keyword to remove all the remote destination port mirroring groups. 

z 

Use the remote-source keyword to remove all the remote source mirroring groups. 

# Create a local port mirroring group numbered 1. 

<Sysname> system-view 

[Sysname] mirroring-group 1 local 

# Create remote destination mirroring group numbered 2. 

<Sysname> system-view 

[Sysname] mirroring-group 2 remote-destination 

mirroring-group group-id mirroring-port mirroring-port-list { both | inbound | outbound } 

undo mirroring-group group-id mirroring-port mirroring-port-list { both | inbound | outbound } 

System view 

2: System level 

group-id: Port mirroring group number, in the range of 1 to 4. 

mirroring-port-list: List of ports to be added to the port mirroring group. You can specify multiple ports by 

providing this argument in the form of { interface-type interface-number [ to  interface-type 

interface-number  ] }&<1-8>, where the interface-type  argument is port type, the interface-number 

argument is the port number, and &<1-8>  means that you can provide up to eight port indexes/port 

index lists for this argument.  

both: Specifies to duplicate both inbound and outbound packets.  

inbound: Specifies to duplicate inbound packets only.  

outbound: Specifies to duplicate outbound packets only.  

Use the mirroring-group mirroring-port command to configure source ports for a port mirroring 

group.  

Use the undo mirroring-group mirroring-port command to remove source ports from a port mirroring 

group. 

Note that: 

z 

The source port cannot be a member port of the current mirroring group. 

z 

A remote destination mirroring group cannot contain source mirroring ports.