3com S7906E 参照ガイド
4-11
DHCP packets sent : 200
Packets dropped due to rate limitation : 20
Dropped invalid packets : 0
display dhcp-snooping trust
Syntax
display dhcp-snooping trust
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp-snooping trust command to display information about trusted ports.
Related commands: dhcp-snooping trust.
Examples
# Display information about trusted ports.
<Sysname> display dhcp-snooping trust
DHCP Snooping is enabled.
DHCP Snooping trust becomes active.
Interface Trusted
========================= ============
GigabitEthernet2/0/1 Trusted
The above output shows that DHCP snooping is enabled, DHCP snooping trust is active, and port
GigabitEthernet 2/0/1 is trusted.
reset dhcp-snooping
Syntax
reset dhcp-snooping { all | ip ip-address }
View
User view
Default Level
1: Monitor level
Parameters
all: Clears all DHCP snooping binding information.
ip ip-address: Clears the DHCP snooping binding information of the specified IP address.