3com S7906E 参照ガイド
1-37
host-advertise
Syntax
host-advertise ip-address cost
undo host-advertise ip-address
View
OSPF area view
Default Level
2: System level
Parameters
ip-address: IP address of a host
cost: Cost of the route, in the range 1 to 65535.
Description
Use the host-advertise command to advertise a host route.
Use the undo host-advertise command to remove a host route.
No host route is advertised by default.
Examples
# Advertise route 1.1.1.1 with a cost of 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0]host-advertise 1.1.1.1 100
import-route (OSPF view)
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | type type | tag tag |
route-policy route-policy-name ] *
undo import-route protocol [ process-id | all-processes ]
View
OSPF view
Default Level
2: System level
Parameters
protocol: Redistributes routes from the specified protocol, which can be bgp, direct, isis, ospf, rip, or
static.
process-id: Process ID, in the range 1 to 65535. The default is 1. It is available only when the protocol is
rip, ospf, or isis.