3com S7906E クイック設定ガイド

 

6-14 

3. Set XMODEM protocol parameter 

4. Update through file in device 

0. Return to boot menu 

 

Enter your choice(0-4): 

Enter 0 to return to the Boot Menu. 

           BOOT  MENU          

1:  Download application file to device  

2:  Select application file to boot  

3:  Display all files in device 

4:  Delete file from device  

5:  Modify bootrom password  

0:  Reboot  

Enter your choice(0-5): 

Enter 0 to reboot the switch. The Boot ROM upgrade is completed. 

If your terminal is connected to the switch over a network, you can upgrade the Boot ROM program and 

host software through command lines. 

Run the FTP Server on the local PC (assume its IP address is 10.10.110.1). Ensure that you have 

configured the username and password and set the correct file directory. Log into the switch through 

Telnet or the console port, and then download the host software package to the switch using FTP.  

Assume that: 

z 

The main boot file is SWITCH002.app. 

z 

The active host software is SWITCH001.app. 

Follow these steps after logging into the switch. 

1)  Download the software to the switch using FTP. 

<3Com> ftp 10.10.110.1 

Trying ...                                                                

Press CTRL+K to abort                                                   

Connected to 10.10.110.1                                                   

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user 

User(none):liujidong                                                       

331 Give me your password, please                                     

Password:                                                                 

230 Logged in successfully        

[ftp] binary 

[ftp] get SWITCH002.app  

[ftp] bye