3M X62w 取り扱いマニュアル

3M™ Multimedia Projector X62w Product Safety Guide

Lamp

Lamp Operation:

The following symptoms may indicate a lamp in need of replacement:

• LAMP indicator lights up red.

• To reduce the risk associated with environmental contamination due to

mercury in the projection lamp:

- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.

- The lamp in this product contains mercury. Dispose of projection lamp in a manner

that is consistent with your local hazardous waste regulations for mercury.

- For recycling and disposal information, contact your respective governmental

agencies.

In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org

In Canada, contact 1-800-362-377 (3M Canada)

WARNING

Display Lamp Operation Hours

To determine the lamp operation hours, follow these steps:

1. While the projector is running, press the MENU button on the remote control.

Choose the “OPTION” using the ▼ button, and press the ► button or the ENTER button.

Choose the “LAMP TIME” using the ▼ button.

2. The operating time of the lamp will be displayed.

The lamp time is the time counted after the last resetting.

√

Note

Please reset the lamp time only when you have replaced the lamp, for a suitable

indication about the lamp.

Reset Lamp Hours

(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,

please perform the next step (2).

(2) Point at the “Go To Advance Menu …” in the menu using ▼/▲ button, then press the

► button.

(3) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press

the ► button.

(4) Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will

appear.

(5) Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp

time.

ENGLISH