Cavalry cadt001sa2 ユーザーガイド
Change RAID Settings
There are two ways to change the product settings. We recommend using
the SteelVine software included with your drive; you may also use the "0-7
Settings Dial" (p17). Changing RAID settings erases any data on the drive.
the SteelVine software included with your drive; you may also use the "0-7
Settings Dial" (p17). Changing RAID settings erases any data on the drive.
NOTE
: Mac Users with OS v10.5 and newer proceed to page 17 for manual
configuration of your RAID settings. For questions, please contact customer
support by emailing customersupport@cavalrystorage.com.
support by emailing customersupport@cavalrystorage.com.
I. Using the SteelVine (GUI) software (In order to use GUI, your unit's "0-
7 Settings Dial" must be set to "7," which is the factory default)
7 Settings Dial" must be set to "7," which is the factory default)
Step 1. Turn the product on.
Step 2. Open the Resources CD in "My Computer," open the folder
"Contents/STEELVINE/" and open the folder corresponding to your operating
system. Install the pkg file (Mac) or the "setup" file (Windows).
"Contents/STEELVINE/" and open the folder corresponding to your operating
system. Install the pkg file (Mac) or the "setup" file (Windows).
14
15