Cavalry cand3001t0 補足マニュアル

ページ / 44
 
 
CAND Series In-Depth User Guide 
Dual HD Giganet Network Attached Storage Enclosure  
Before you begin  
1. To use the Dual HD Giganet NAS Enclosure (hereafter referred to as “NAS”) to share your 
files with other computers on the network, you must use an Ethernet cable together with 
properly configured network settings.  
2. For optimal security and convenience, we recommend designating a single computer to 
handle all NAS configuration settings.  
 
Check your package contents 
• 
DUAL HD Giganet NAS (Network Attached Storage) 
• 
Ethernet cable  
• 
External power adapter  
• 
Power cable  
• 
User’s Manual 
 
Connect the NAS to Network.  
1. Connect the power adapter to the receptor at the back panel of the NAS and then plug the 
other end of the power adapter to an electrical outlet. Turn on the power switch; the Power 
LED will light up to indicate proper operation.  
 
2. Insert the Ethernet cable to the LAN port on the back of the unit and the other end to an 
available Ethernet port on the network adapter in a router/switch/hub. The LED light for Link 
Port will illuminate to indicate proper connection.  
-Please use a straight-through cable to the LAN port. 
-Please make sure that your Local Area Network is working properly prior to inserting 
Ethernet cable. 
 
3. To create a printer server, simply connect the printer via USB directly to the NAS.  
 
Note: the NAS does not support GDI/Host-based printers  
 
4. Press the power switch to start or shut down the NAS. It will take about 3 minutes to boot 
up / shut down the operation system.  
 
5. Before setting up the NAS, it’s recommended to go through Q&A section at the end of the 
manual to avoid mistakes.