Xanté 8300 インストール手順

Introduction

This chapter describes how to set up your new Accel-a-Writer 8300
printer. It includes finding the right location; unpacking the printer;
installing paper handling options, toner, and paper; connecting the
power cord; printing a start-up page; and connecting to an interface.

Printer Location

When choosing the location for your printer, find an area that

•

Is level, sturdy, and capable of supporting approximately
44 lbs (19.98 kg)

•

Has sufficient clearance for operation and maintenance

•

Has a temperature range between 50˚ to 90.5˚ Fahrenheit
(10˚ to 32.5˚ Celsius) without rapid changes

•

Has a relative humidity between 20% and 80%

•

Is well ventilated

•

Is away from direct sunlight, open flames, refrigerators,
water faucets, humidifiers, heaters, or similar equipment

•

Is away from strong vibrations or electromagnetic fields

•

Is close enough to the host computer to allow proper
communication: within 10 feet (3 m) for parallel; within
25 feet (7.5 m) for serial; within 1000 feet (305 m) for
LocalTalk

•

Is close to a grounded electrical outlet with the proper
voltage

Do not use ammonia-based cleaners on or around the
printer; they react chemically with the toner.