Xerox 2101 ユーザーガイド

9.1 Troubleshooting

Document jams occur
very often.

Are suitable documents used?

Load suitable documents on the DADF.

“3.1 Types of Documents”
“3.2 Loading Documents”

Are your documents out of shape, name
cards, transparencies or of thin material?

Does the document have any adhesive
paper, clips or cellophane attached to it?

Remove all attachment like adhesive
paper, clips and cellophane before
making copies.

Is the document guide skewed?

Set the document guide properly.

Is the document torn and pieces of the
paper left in the DADF?

Open the DADF cover to check.

Paper is often jammed
or wrinkled.

Is paper properly loaded in the paper
tray?

Load the paper properly.

Is the paper tray properly set?

Push in the paper tray completely.

Is the paper loaded in the paper tray
folded or wrinkled?

Replace with paper from a new ream.

Is the paper curled?

Turn over the paper in the paper tray or
replace with paper from a new ream.

Are there jammed/torn paper or foreign
objects left inside the machine?

Open the machine or pull out the paper
tray to remove the paper or objects.

Is the paper moist or damp?

Replace with paper from a new ream.

Is paper loaded in the paper tray of the
correct specification?

Replace with paper of the correct
specification.

“2.1 Paper to Use”
“2.2 Loading Paper/Changing 
Paper Size of Paper Trays”

Has the paper in the paper tray exceeded
the maximum fill line?

Do not load the paper exceeding the
maximum fill line.

The document cannot
be fed into the DADF.

Is the document too small?

The smallest size that can be loaded in
the DADF is A5.

The document edge is
folded.

Is the document curled?

Straighten the document and load it
again.