Xerox 100 操作ガイド

This chapter helps you prepare for delivery and installation of the 
NPS/IPS Extension option. It is intended for the person who is 
responsible for coordinating the installation of the NPS/IPS 
Extension option at your site, and provides an overview of the 
tasks associated with installation.
NOTE: The NPS/IPS software must be reinstalled each time your 
DocuPrint EPS software is upgraded or reinstalled.

For complete installation planning details, refer to your DocuPrint 
NPS/IPS Installation Planning Guide and the DocuPrint 100/115/
135/155/180 EPS Installation Planning Guide.

The Xerox representative needs certain information about your 
environment to complete the software installation and 
configuration process for the NPS/IPS Extension option.

The following information provides an overview of activities 
associated with setting up your system to accept PostScript, PCL, 
or ACSII jobs. Some of the most typical tasks that must be 
performed prior to installation are:
•

Identify networked client workstations that will be used to 
submit jobs.

•

Install network to system location, if applicable.

•

Establish network addresses

Be prepared to provide the Xerox personnel with the following 
information during installation:
•

Network information such as host-name, IP address, IP 
netmask, and default router

•

AppleTalk network information, if applicable

•

Novell network information, if applicable

•

Superuser password

•

Accounting information

•

Xerox client software information