Xerox 100 操作ガイド
NPS/IPS Extension Operations Guide
3-1
3 Changing print modes
This chapter provides information on switching between the
various print modes of the printing system.
various print modes of the printing system.
Changing from EPS print mode to NPS/IPS print mode
NOTE: You must be logged in the system as either an Operator or
Administrator to switch from EPS to NPS/IPS mode.
Administrator to switch from EPS to NPS/IPS mode.
Use the following procedure to change operating modes of the
printing system from EPS mode to NPS/IPS mode.
1. On the DocuSP Print Services window, click the Queue
printing system from EPS mode to NPS/IPS mode.
1. On the DocuSP Print Services window, click the Queue
Manager icon. The Queue Manager window opens.
2. In the Queue Manager window, hold all queues by performing
the following:
a. Right-click in the queue list area, and select [Select All]
a. Right-click in the queue list area, and select [Select All]
from the pop-up menu.
b. Right-click again in the queue list area, and select [Do Not
Accept Jobs] from the pop-up menu.
c. Display the pop-up menu again, and select [Do Not
Release Jobs].