Xerox C20 ユーザーズマニュアル
Printer Memory
Appendix C: Printer Options
❖
C-7
3
Hold the memory SIMM with the connection points
pointing toward the connector and position the notch as
shown.
pointing toward the connector and position the notch as
shown.
4
Insert the memory SIMM all the way into the connector
at a 45° angle, and rotate it down until it snaps into place.
at a 45° angle, and rotate it down until it snaps into place.
You can hear the memory option click into place.
5
Verify that both metal clips on the connector are fastened,
and that the two pins on each end of the connector are
pushed through the holes on the memory option.
and that the two pins on each end of the connector are
pushed through the holes on the memory option.
6
Continue with the section “Closing the System Board from
the Front” on the next page.
the Front” on the next page.