Xerox 3600 ユーザーガイド
5.8
<Loading print media>
5
Press Start/Stop.
The printer feeds the sheet and prints. After one page is printed, the
message appears again.
message appears again.
Note
If you do not press the button, after a pause the printer will
automatically feed the next sheet.
automatically feed the next sheet.
6
Insert the next sheet into tray1(MPT) and press Start/Stop.
Repeat this step for every page to be printed.
Selecting an output location
The printer has two output locations; the rear cover (face up) and the
output tray (face down).
output tray (face down).
The printer sends output to the output tray by default. To use the output
tray, make sure that the rear cover is closed.
tray, make sure that the rear cover is closed.
Notes
• If paper coming out of the output tray has problems, such as
excessive curl, try printing to the rear cover.
• To avoid paper jams, do not open or close the rear cover
while the printer is printing.
Printing to the output tray
(Face down)
The output tray collects paper face down, in the order in which the sheets
were printed. Tray should be used for most print jobs.
were printed. Tray should be used for most print jobs.
1
1
rear cover
2
output tray
2