Xerox 6180 ユーザーガイド

When the size or type of paper that is loaded is different from the setting, the print quality may 
fall or paper may jam. Specify the correct paper type and size.

When installing the optional sheet feeders if Paper Tray is set to Auto on the print driver, the 
feeding tray is automatically specified according to the setting on the control panel. Also, 
when the paper size and type setting for each tray is the same, printing continues by changing 
the feeding tray if the paper in the specified tray has run out.

Display Popup

Specifies whether or not to display the message that prompts you to set the paper 
size and type every time you load paper in the Tray 1 (MPT).

When you select On, the message that prompts you to set the paper size and type 
is displayed.The default is Off.

MPT Mode

Specifies the way to set the paper type and size settings to be loaded in 
Tray 1 (MPT).

■

Panel Specified (default)
You can specify the paper type and size settings on the control panel. Printing 
can be done only when the settings on the print driver matches the settings on 
the control panel. When a mismatch of paper sizes occurs, follow the 
instructions displayed on the control panel.

■

DriverSpecified
You cannot specify the settings on the control panel. Printing is done using the 
settings on the print driver.