Xerox 123 ユーザーガイド

ページ / 166
15 Problem Solving 
146
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
The data format of the print 
job does not match the print 
environment setting of the 
client.
When printing a binary file in 
the PostScript language, 
make TBCP valid in the 
machine. If using Windows 
on the client, disable Ctrl-D. 
For details, refer the 
Windows PRINTER.WRI file.
The IPX checksum is set to 
an invalid level.
Use the Set command on the 
file server console to check 
whether the IPX checksum is 
set to level 0 or 2.
Enter the following command 
on the file server console to 
set the IPX checksum to level 
1.
Set Enable IPX Checksum = 
x (x: 1)
The NCP packet signature is 
set to an invalid level.
Use the Set command on the 
file server console to check 
whether the NCP packet 
signature is set to level 0 or 
3.
Enter the following command 
on the file server console to 
set the NCP packet signature 
to level 1, and then restart the 
file server.
set NCP Packet Signature 
Option = x (x: 1)
The connected server is set 
over the router when using 
TCP/IP.
Check whether the router can 
use multi-cast.
When the router cannot use 
multi-cast, install the 
NetWare5 server in the same 
network using TCP/IP. Then 
describe the address over the 
router in the 
[SYS:\ETC\SLP.CFG] file.
The IP address has been 
expired or has not been 
found when using the DHCP 
server.
Use the PING command to 
check whether the IP address 
of the machine is available.
Set the IP address.
Another printer object has 
been connected.
Use NWADMIN to check that 
the object is correctly 
assigned to the required print 
server.*
Use the CentreWare Utilities 
CD-ROM or CentreWare 
Internet Services to specify 
the correct file server name, 
tree name, context name, 
and active mode.
The file server goes down.
Select [Network 
Neighborhood] of Windows to 
search for the file server.
Activate the file server.
A printer having the same 
machine name exists on the 
network.
Switch off the machine, and 
then use NWADMIN to check 
that the printer object is in the 
job standby status.
Use the CentreWare Utilities 
CD-ROM to specify another 
machine name.
Cause
Confirmation Method
Action