Xerox M24 補足マニュアル
6a3 - NetBIOS over IP Peer to Peer Printing
1.
At the Desktop, right mouse click the Network Neighborhood icon and select Properties. Click on the
Protocols tab and verify that the TCP/IP protocol has been installed in the workstation.
Note: If the TCP/IP Protocol is not present in the Protocol list, click the Add button, select TCP/IP
Protocol from the available list, and click OK. If the setup program fails to find the required files, you
will have to click Have Disk… to load the protocol from the Operating System installer disk for this
workstation.
Protocols tab and verify that the TCP/IP protocol has been installed in the workstation.
Note: If the TCP/IP Protocol is not present in the Protocol list, click the Add button, select TCP/IP
Protocol from the available list, and click OK. If the setup program fails to find the required files, you
will have to click Have Disk… to load the protocol from the Operating System installer disk for this
workstation.
2.
After verifying that the TCP/IP Protocol is present, click on TCP/IP Protocol to highlight it, and click on
the Properties button of the Protocols window. If using Dynamic TCP/IP Addressing, select the radio
button for Obtaining an IP Address Automatically from the DHCP Server. If using Static TCP/IP
Addressing, select the radio button marked Specify an IP Address, and enter in the required IP
Address, Subnet Mask, and Gateway addresses for this workstation. Click OK when done.
the Properties button of the Protocols window. If using Dynamic TCP/IP Addressing, select the radio
button for Obtaining an IP Address Automatically from the DHCP Server. If using Static TCP/IP
Addressing, select the radio button marked Specify an IP Address, and enter in the required IP
Address, Subnet Mask, and Gateway addresses for this workstation. Click OK when done.
3.
Select the Services tab and verify that the Workstation service is installed. This is the NT workstation's
client for communicating on Microsoft Networks using the SMB protocol.
Note: If the Workstation service is NOT loaded, click the Add button, select Workstation from the
available list, and click OK. If the setup program fails to find the required files, you will have to click
Have Disk… to load the service from the Operating System installer disk for this workstation.
client for communicating on Microsoft Networks using the SMB protocol.
Note: If the Workstation service is NOT loaded, click the Add button, select Workstation from the
available list, and click OK. If the setup program fails to find the required files, you will have to click
Have Disk… to load the service from the Operating System installer disk for this workstation.
4.
Click the DNS Tab and make sure that the workstation has a Host Name entered into the Host Name
text entry box. Optionally enter in the Domain in which this Host resides into the Domain text box
(xerox.com, for example). Optionally use the Add… button to enter in DNS Server IP Addresses for the
DNS Service Search Order.
text entry box. Optionally enter in the Domain in which this Host resides into the Domain text box
(xerox.com, for example). Optionally use the Add… button to enter in DNS Server IP Addresses for the
DNS Service Search Order.
5.
Click on the WINS Address Tab and verify that the "Enable DNS for Windows Resolution" checkbox is
checked (the preferred method for resolving host names to IP addresses on TCP/IP networks).
Note: If you are operating a Windows Internet Naming Service (WINS) Server on an NT only network,
you might alternatively wish to deselect the "Enable DNS for Windows Resolution" checkbox and supply
the IP addresses of a Primary (and Secondary, if used) WINS Server.
checked (the preferred method for resolving host names to IP addresses on TCP/IP networks).
Note: If you are operating a Windows Internet Naming Service (WINS) Server on an NT only network,
you might alternatively wish to deselect the "Enable DNS for Windows Resolution" checkbox and supply
the IP addresses of a Primary (and Secondary, if used) WINS Server.
Add the Printer to the Windows NT4 Desktop
1.
From the Start menu, select Settings and then Printers.
2.
Double-click Add Printer.
3.
When the Add Printer Wizard displays, select Network Printer.
4.
Select Browse to search for the printer's Workgroup over the Microsoft network.
5.
Select the plus symbol (+) to the left of Entire Network to expand it if necessary.
6.
Double click the name of the Workgroup for the printer as shown on the Settings List. Select the SMB
Host Name as shown on the Settings List. Click OK, then click Next.
Host Name as shown on the Settings List. Click OK, then click Next.
7.
You will be prompted for a print driver. Select Have Disk and browse to the location of your print
drivers.
drivers.
8.
Select the .INF file and click Open.
9.
When the "Install from Disk" screen displays, verify that the path and file name are correct and click OK.
10.
Select the model that corresponds to your Printer and click Next.
11.
At the next dialog, enter a name for your Printer and select either Yes or No for making this printer your
default Windows printer. Select Yes if you will be printing primarily to this printer from your Windows
applications. Click Next.
default Windows printer. Select Yes if you will be printing primarily to this printer from your Windows
applications. Click Next.
12.
Select Yes to print a Test Page.
13.
Select Finish and verify that the Test Page printed out at the Printer.
Configure the Print Driver
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a3.htm (3 of 4) [9/4/03 8:32:43 AM]