Xerox pro 16p ユーザーガイド

Follow the steps below to properly set up your Xerox Pro 16p.

1.  Remove the bag from the Pro 16p.

2.  Remove the pieces of tape and the packing material.

Remove the tape and the packing material supporting the
clear plastic 2-sided tray.

3.  To ensure the 2-sided tray is in the correct position,

gently push it in the direction shown by the arrow.

4.  Open the Automatic Document Feeder (ADF) and

remove the packing materials shown.

5.  Unscrew and remove the shipping screw from the left

side of the Pro 16p.

CAUTION:  The Pro 16p will malfunction if the shipping
screw is not removed.

6.  Lift and pull open the paper tray.  Turn and remove the

paper tray button.

CAUTION:  Paper will misfeed if the paper tray button is
not removed.

Note:  Be sure to remove the pressure plate lock from both
paper trays.