Gestetner 1045 ユーザーガイド
On-Hook Dial
51
4
On-Hook Dial
This is just like using the external tel-
ephone, except you do not have to
pick up the external telephone before
dialing. Just press the
ephone, except you do not have to
pick up the external telephone before
dialing. Just press the
{On Hook Dial}
key and dial the number. If you hear
a voice, you can pick up the external
telephone and speak with the other
party.
a voice, you can pick up the external
telephone and speak with the other
party.
Limitation
❒ This feature is not available in
some countries.
❒ On-Hook Dial does not work with
ISDN lines.
❒ This feature is not available for the
optional Extra G3 Interface Unit.
A
Place your original and select any
scan settings you require.
scan settings you require.
Reference
⇒ Chapter 2, "Setting Originals"
in the Basic Features manual
⇒ Chapter 2, "Scan Settings" in
the Basic Features manual
⇒ Chapter 2, "Setting Originals"
in the Basic Features manual
⇒ Chapter 2, "Scan Settings" in
the Basic Features manual
B
Press the
{{{{On Hook Dial}}}} key.
You will hear a low tone from the
internal speaker. If you wish to
cancel this operation, press the
internal speaker. If you wish to
cancel this operation, press the
{On
Hook Dial
} key again.
C
Dial.
The machine immediately dials the
destination. If you make a mistake,
press the
destination. If you make a mistake,
press the
{On Hook Dial} or {Clear
Modes
} key and return to step B.
D
When the line is connected and
you hear a high-pitched tone,
press the
you hear a high-pitched tone,
press the
{{{{Start}}}} key.
• If you hear a voice, pick up the
external telephone before you
press the
press the
{Start} key and notify
the destination that you want to
send a fax message (ask them to
switch to Facsimile mode).
send a fax message (ask them to
switch to Facsimile mode).
• After transmission, the machine
will return to standby mode.