Gestetner c7528 操作ガイド
Monitoring and Configuring the Printer
244
key [ key value ] val [1|2|3|4]
You can specify the WEP key when entering
in hexadecimal.
in hexadecimal.
With a 64-bit WEP, you can use 10 digit
hexadecimals. With a 128-bit WEP, you can
use 26 digit hexadecimals.
hexadecimals. With a 128-bit WEP, you can
use 26 digit hexadecimals.
Up to four WEP keys can be registered.
Specify the number to be registered with
“val”.
Specify the number to be registered with
“val”.
When a WEP is specified by key, the WEP
specified by key phrase is overwritten.
specified by key phrase is overwritten.
To use this function, set the same key num-
ber and WEP key for all ports that transmit
data to each other.
ber and WEP key for all ports that transmit
data to each other.
You can omit the numbers with “val”. The key
number is set to 1 when making these omis-
sions.
number is set to 1 when making these omis-
sions.
keyphrase [ phrase ] val [1|2|3|4]
You can specify the WEP key when entering
in ASCII.
in ASCII.
With a 64-bit WEP, you can use 10 digit
hexadecimals. With a 128-bit WEP, you can
use 26 digit hexadecimals.
hexadecimals. With a 128-bit WEP, you can
use 26 digit hexadecimals.
Up to four WEP keys can be registered.
Specify the number to be registered with
“val”.
Specify the number to be registered with
“val”.
When a WEP is specified by key phrase, the
WEP specified by key is overwritten.
WEP specified by key is overwritten.
To use this function, set the same key num-
ber and WEP key for all ports that transmit
data to each other.
ber and WEP key for all ports that transmit
data to each other.
You can omit the numbers with “val”. The key
number is set to 1 when making these omis-
sions.
number is set to 1 when making these omis-
sions.
encval [1|2|3|4]
You can specify which of the four WEP keys
is used for packet encoding. “1” is set if a
number is not specified.
is used for packet encoding. “1” is set if a
number is not specified.
auth [open|shared]
You can set an authorization mode when us-
ing WEP. The specified value and authorized
mode are as follows:
ing WEP. The specified value and authorized
mode are as follows:
open: open system authorized (default)
shared: shared key authorized rate
Parameter
Value configured